Navegando por Autor "Magalhães, Fabio Costa"

Agora exibindo 1 - 3 de 3

Item
Análise comparativa entre estimadores normatizados de resistência à compressão do concreto aplicada ao concreto utilizado na laje de fundo do dique seco do pólo naval do Rio Grande na cidade de Rio Grande - RS
(2012) Magalhães, Fabio Costa; Real, Mauro de Vasconcellos
A variabilidade da resistência do concreto torna fundamental a utilização de metodologias estatísticas capazes de estabelecer parâmetros para a aceitação das estruturas. A utilização de um grande número de resultados práticos de ensaios de resistência é de grande importância para a validação e calibração das normas e especificações técnicas existentes. O presente trabalho realizou uma análise comparativa entre as metodologias de estimativa de resistência à compressão de diferentes regiões produtoras de concreto. Foram utilizados os resultados dos ensaios realizados na construção do dique seco do Estaleiro Rio Grande para a realização da comparação entre as estimativas de resistência característica definidas pelas normas NBR 12655 [6], ACI 214R-02 [1] e NP-EN-206-1 [9].
Item
Probabilistic analysis of the fiber reinforced concrete used in the construction of the Estaleiro Rio Grande dry dock
(2011) Magalhães, Fabio Costa; Real, Mauro de Vasconcellos
Due to the variability of the concrete strength, it is fundamental to use statistical methodologies to establish the parameters for the concrete structures acceptance. The utilization of a large number of strength test results is very important to the validation and calibration of the existing standard codes and technical specifications. The objective of this study is to make a statistical analysis of the strength test results of the concrete reinforced with metallic and propylene fibers used in the construction of the Estaleiro Rio Grande dry dock, in Rio Grande-RS. A correlation model between the concrete tensile and compressive strengths was proposed. A model to predict the increasing of the concrete strength with time was also established both for the case of compression, as in the case of tension. Furthermore, it was made a comparison among the concrete characteristic strength calculated estimates according to the NBR 12655 [9] and EN-206-1 [17] standard codes and to the ACI COMMITTEE 318 [2].
Item
Statistical analysis and conformity testing of concrete in port construction work
(2014) Larrossa, Michele da Cruz; Real, Mauro de Vasconcellos; Dias, Claudio Renato Rodrigues; Magalhães, Fabio Costa
Conformity control of concrete is part of a range of control and standard methods which must be employed in all construction work to assure its compliance with quality requirements. The compressive strength of the concrete is considered as a random variable that must be controlled by standardized sampling and testing in order to ensure the structural safety. Therefore, the use of a large amount of compressive strength test results of concretes with similar characteristics has been seen as an important tool in the assessment of current standard norms. This paper de-scribes an analysis based on the conformity control used in large port construction works which have recently been carried out in the Rio Grande Port, located in Rio Grande, RS, Brazil. Statistical analyses were performed and acceptance tests of the product were conducted. They were based on the acceptance criteria of different methodologies from different continents and showed the variations that can occur in the results of the conformity testing, depending on the adopted model. It is worth mentioning that the concrete used in port construction works in the region has been in accordance with current Brazilian norms.